28-05-2018, 10:22 PM
The TiltEQ
![[Image: tilt.png]](http://matthiaskock.de/wordpress/tilteq/wp-content/uploads/sites/2/2017/07/tilt.png)
The center frequency of the tilt function is 1300 Hz.
Tilt EQ is based on FIR filters that can be either linear or minimum phase. Traditional minimum phase shelving IIR filters also have been implemented in order to allow further adjustments. The following graphs show second order shelving filters in comparison to the FIR approach with linear slope. The tilt of the slope can be set by the linear tilt knob. The steepness of the slope is given in dB/oct.
The following graph shows two different settings with the linear slope set to maximum, in this case -1dB / oct. and 1dB/oct:
http://matthiaskock.de/wordpress/tilteq/...21/tilteq/
or
[attachment=3762][attachment=3763][attachment=3764]
The center frequency of the tilt function is 1300 Hz.
Tilt EQ is based on FIR filters that can be either linear or minimum phase. Traditional minimum phase shelving IIR filters also have been implemented in order to allow further adjustments. The following graphs show second order shelving filters in comparison to the FIR approach with linear slope. The tilt of the slope can be set by the linear tilt knob. The steepness of the slope is given in dB/oct.
The following graph shows two different settings with the linear slope set to maximum, in this case -1dB / oct. and 1dB/oct:
http://matthiaskock.de/wordpress/tilteq/...21/tilteq/
or
[attachment=3762][attachment=3763][attachment=3764]